Home›Machines
The Lineup
Sheet lasers, tube lasers, and handheld systems — sold, installed, trained, and serviced out of the United States. Start with the kind of work you do, or go straight to the model you already have in mind.
6 models in the lineup
Install & training included
3
Machine Categories
Full Line
Models Available
5'×10' – 8m
Bed Sizes
US
Install & Support
By Category
Three families of machine. Which one you need comes down to what you are cutting — flat material, tube and profile, or work that has to happen wherever the part already is.
Flat sheet and plate, from a compact 5'×10' shop machine up to an 8m × 3m plate bed. Four models, 1.5kW to 30kW+.
View Sheet Lasers →
Round, square, rectangular and structural profile up to 6m stock, with automatic bundle loading so one operator can keep it fed.
View Tube Lasers →
Handheld welding and surface cleaning on a rolling cart. The lowest-cost way to put laser capability on your floor.
View Handheld Systems →
By Model
If you already know the size and format you are after, go straight to the spec sheet.
Compact open-frame 3.0m × 1.5m sheet laser with light-curtain safety. The entry point into fiber.
View Mini BL →
Full enclosure and a pallet exchange table on a 3.0m × 1.5m bed — load off-line while the machine cuts.
View SG VII Pro →
Large-format 6.0m × 2.5m shuttle-table production laser built for volume sheet work.
View BT VII →
XL 8.0m × 3.0m bed with extended shuttle table for oversize sheet and heavy plate.
View BL V →
Dedicated tube and profile laser with automatic bundle loading for 6m stock.
View WP Light →
3kW-class handheld welder and cleaner — weld, clean, and finish from one cart.
View SN Pro →
How to Choose
You do not need to know wattage to start this conversation. Answer these and the lineup narrows to one or two machines.
Flat sheet and plate points at the sheet lasers. Tube, pipe, angle, and structural profile points at the tube laser. Assemblies and repair work point at handheld.
Bed size is the one thing you cannot change later. Buy for the largest sheet you actually run, not the average one.
Thickness and duty cycle set the wattage. Running thick plate all shift is a different machine than occasional heavy work.
If loading and unloading is the constraint, an exchange table or auto-loading buys you more capacity than raw wattage will.
Send us a part, a print, or a description of what you cut in a week. We will tell you which machine handles it — and if the honest answer is that you do not need the bigger one, we will say that too.
Tell us what you run. A real quote in one business day.
