Home›Machines›Tube & Pipe Lasers
Machine Category
Automated tube processing for full 6-meter stock. Cut, cope, slot, and bevel round, square, and structural profiles in a single hands-off pass — and delete the saw, the mill, and the layout table from the job.
6m stock length
Bundle auto-loading
Round • Square • Beam
6m
Stock Length Handled
Auto
Bundle Loading
±0.03 mm
Linear Repeatability
One Pass
Cut • Cope • Bevel
The Category
Tube work is where shops quietly lose hours. Saw it, deburr it, mark it, notch it, grind it, clamp it, fixture it, then hope the miter closes. A tube laser collapses that whole sequence into one setup — the profile goes in as raw stock and comes out cut to length with every hole, slot, cope, and weld-prep feature already in it.
Length, holes, slots, and copes done in a single setup
Fish-mouth and bevel features cut, not hand-fitted
Tab-and-slot geometry makes assemblies self-locating
Part marking cut in place — no separate stamping step
Consistent joint fit-up means less grinding and less weld filler
When to Choose It
A tube laser is not a general-purpose machine — it is a specialist that pays back fast in the shops that actually run tube.
If cut-to-length is scheduled around one bandsaw and everything downstream waits on it, the constraint is the saw — not the welders standing next to it.
Grinders and hole saws are the slowest, least repeatable way to fit tube. Cutting the cope with the beam makes every joint identical.
When welders spend as long clamping and shimming as they do welding, the fix is upstream. Laser-cut tab-and-slot assemblies drop together.
Round, square, rectangular, angle, channel, and beam in the same week means constant setup changes on conventional equipment — and none on a tube laser.
Bundle loading feeds the machine unattended. A long production release keeps running while your crew works on something that needs hands.
Every tube part you buy out carries someone else's lead time and margin. Bringing it in-house also brings the schedule back under your control.
Hands-Off Processing
Automatic bundle loading feeds full-length stock into the machine one piece at a time, chucks it, processes it, and unloads finished parts — so a single operator can run the cell and still be useful somewhere else on the floor.
Schedule a DemoThe Machine
One dedicated tube system, configured around the profiles and volumes you actually process.
Tube & Pipe
Dual-chuck tube & pipe laser for stock to 6.5 m. Full rotation with straight, bevel and fish-mouth cutting on round, square and rectangular tube, with semi-automatic or bundle loading.
View Machine →
Tube • Heavy
Three-chuck heavy tube laser for sections to 500 mm and stock to 12.5 m. Zero-point cutting and zoned unloading for structural steel, pipeline and drilling work.
View Machine →
Pairs With
The flat half of a structural package. An 8.0m × 3.0m plate laser for the gussets, base plates, and connection plates that fasten to your tube.
View Machine →
Pairs With
Laser-cut joints deserve a laser weld. A 3kW handheld system for closing tube assemblies fast and cleaning the weld zone before and after.
View Machine →
What It Processes
If it comes off the rack in a straight length, it very likely runs on this machine.
Round Tube & Pipe
Square Tube
Rectangular Tube
Angle
Channel
I & H Beam
Flat Bar
Mixed Bundles
Operations
Square, clean, and burr-light — a finished end, not a saw cut that still needs deburring.
Saddle joints cut to the mating profile so tube-to-tube connections seat without hand fitting.
Fastener holes, drain slots, wire pass-throughs, and clearance cutouts placed in the same setup.
Edge preparation cut into the part so a full-penetration weld doesn't start with a grinder.
Self-locating geometry that turns an assembly into a kit — less fixturing, fewer measuring errors.
Piece marks etched right on the member so a large assembly can be sorted and built from the drawing.
Send us your profile mix, wall thickness, and typical run length — a laser specialist will confirm the configuration and send a real quote within one business day.
Tell us what you run. A real quote in one business day.
