Home›Support›Parts & Consumables
Parts & Consumables
A nozzle is a small part until it is the reason a $400,000 machine is dark. Common consumables are stocked in the United States and ship from US inventory — not from a container crossing an ocean.
US warehoused inventory
Spares kits by machine
Ordered by serial number
In Stock
Common Consumables
Stateside
US Warehouse
By Serial
Correct-Fit Ordering
Kits
Spares Packages Available
Why Stateside Stock
The single most common reason an imported laser sits idle is a consumable that has to be air-freighted from overseas. We hold the fast-moving items in the United States specifically so a worn nozzle or a spattered protective window is a shipping question, not a customs question.
Fast-moving consumables held in US inventory
Parts matched to your machine model and serial number
Recommended spares kits so critical items sit on your shelf
Technicians can identify the right part from a photo
Larger assemblies and optics sourced on request
What We Stock
Availability varies by machine model and configuration. Confirm your specific part numbers with us using your serial number.
Nozzles across the common bore sizes and single/double configurations, protective windows, ceramic rings, and nozzle connectors — the items your operators replace most often.
Highest-turnover items
Collimating and focusing lenses, protective window cartridges, and optics-handling supplies. Optics are ordered against your specific head — send us the serial number.
Ordered to your head
Cabinet and extraction filters, slats, chiller coolant and filters, way lube, and cleaning supplies for optics and bellows — the housekeeping stock that prevents service calls.
Prevents most downtime
Recommended Spares Kit
We can put together a spares package matched to your machine and how hard you run it — the handful of items that account for the overwhelming majority of unplanned stoppages. Buy it once, replenish what you use.
Spec My Spares KitHow to Order
Laser consumables look nearly identical across models and are absolutely not interchangeable. This is how we make sure you get the correct one.
Model name and serial number from the data plate. That pins the cutting head and the exact consumable family your machine takes.
Part number if you have it. If not, a photo of the worn part next to a tape measure is usually enough for us to identify it.
We verify fitment against your configuration and come back with availability and pricing before anything ships.
In-stock items ship from US inventory. We can note your recurring consumption so re-orders take one phone call.
Wear & Replacement
Consumable life is driven by material, thickness, gas, power, and how clean the shop is — so replace on condition rather than on a calendar. These are the symptoms to watch.
| Nozzle | Replace when the bore shows spatter build-up, erosion, or is no longer round. Symptoms: sudden dross, inconsistent piercing, cut drifting off centre. |
|---|---|
| Protective window | Inspect every shift. Any spatter, pitting, burn mark, or hazing means replace — a damaged window rapidly destroys expensive optics behind it. |
| Ceramic ring | Replace after a head crash, or when cracked or chipped. Capacitive height sensing becomes erratic before it fails outright. |
| Focusing / collimating lens | Long life if the protective window is maintained. Replace on visible contamination, coating damage, or unexplained loss of cut quality at correct parameters. |
| Cabinet & extraction filters | Replace on the schedule in your manual or sooner in dusty environments. Blocked filters raise cabinet temperature and shorten electronics life. |
| Slats | Replace or flip when cut-through and slag build-up begin marking part undersides or disturbing sheet support. |
| Chiller coolant | Follow the manual's interval and specification. The wrong coolant, or old coolant, is a common cause of laser-source alarms. |
General guidance only — your machine's documentation is the authority on part numbers, intervals, and specifications. When in doubt, call us with the serial number.
Also In Support
Remote diagnostics, field service, and preventive maintenance programs from US-based technicians.
View Service →
Operators who understand consumable wear replace parts at the right time — and crash heads far less often.
View Training →
Maintenance schedules, cut charts, and documentation for your machine's specific configuration.
View Resources →
Existing owners: call (847) 283-7035 with your serial number and we will confirm the right part. Shopping for a laser? Tell us what you cut and we will quote it.
Tell us what you run. A real quote in one business day.
